Booting Uboot in QEMU

U-Boot is universal bootloader, which is used very widely. Its a starting point to learn the low level hardware interactions for me. Qemu supports Versatile PB and we can try to emulate uboor on versatile PB using QEMU.

Creating workbench:

$ mkdir uboot
$ cd uboot;
$ mkdir original
$ mkdir src
$ cd original

Download U-Boot source code from U-Boot FTP.

$ wget -c
$ cd ../src/
$ tar -xf ../original/u-boot-latest.tar.bz2
$ cd u-boot-2010.03

Compile the u-Boot code.

$ export ARCH=arm;
$ export CROSS_COMPILE=arm-none-eabi-;

$ make versatilepb_config 
$ make all

Now, if build went right, you should have u-boot.bin in the folder, and to boot this, run,

$ qemu-system-arm -M versatilepb -m 128M -nographic -kernel u-boot.bin;

Now you will be in uBoot prompt!!

U-Boot 2010.03-dirty (May 17 2013 - 15:52:24)

DRAM:   0 kB
## Unknown FLASH on Bank 1 - Size = 0x00000000 = 0 MB
Flash:  0 kB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   SMC91111-0
VersatilePB #

Try command like ‘?’, ‘help’ etc..


One thought on “Booting Uboot in QEMU”

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s